Dry mortar production line 50T/H plant dry mortar plant 50t/h mix plant
Product introduction of dry mortar production line:
The dry mix plant mortar, pre-treated raw materials will be lifted into the raw material hopper, then the raw materials flow through the hopper, then the computerized batching, screw conveyor dosing, mixing and packaging machines pack into bags or bulk or finished product warehouse to car storage process to the final product.
Dry construction mix plant is widely used in the production of all kinds of construction mortars: wall putty, mortar, masonry mortar, tile adhesive, waterproof mortar, tensile mortar, thermal insulation mortar, etc.
Main characteristics of dry mortar production line:
Dry production part:
In order to obtain dry sand that meets the production requirements, the wet sand must be dried with a moisture content of less than 0.5%. The main production equipment used in the drying process is the tee dryer, which is a recently developed dryer for drying sand with high thermal efficiency, novel structure, compactness, stability and efficiency . After the sand is dried, it is sent by belt conveyor to the sorting screen. The dry sand is divided into several grains according to the process requirements and stored in the discharge hopper.
Material storage part
The material storage section consists of several circular silos of different volumes, which are equipped with service ladders and fences. The silos have a loading port on top, an access port, and a vacuum cleaner on top of the silo. Each silo is also equipped with a height sensor that helps the staff to know the material condition of the silo. The lower throat of the silage is equipped with a valve gate and various materials are fed into the hopper via a screw conveyor for weighing.
Material measuring part
The material measurement system consists of a weighing hopper, a steel frame and a set of load cells.
The weighing hopper is a closed housing for the hopper, which is equipped with a discharge screw in the lower part and a loading hole and breathing system in the upper part. According to the command of the control center, the materials are added to the weighing hopper in order according to the prescribed formula. After the measurement is completed, it is necessary to wait for the command in order to send the material to the inlet of the next bucket elevator stage.
FAQ
Q: How about the price?
A: We are factory and be able to give you the lowest price than market one, and we have a policy that for saving time and absolutely honest business attitude, we quote as low as possible for any customer, and discount can be given according to quantity.
Q: Do you provide after-sale service?
A: Yes. The warranty period of our machines is one year, and we have a professional after-sale service team to promptly and thoroughly solve your problems.
Q: Service and Payment Terms?
A: We usually accept T/T, LC. T/T: 30% in advance as down payment, the balance before delivery We take pictures of finished products before delivery.
Related products:
| NO. | Product Name | Type |
| 1 | | Fixed and Mobile |
| 2 | | Twin Shaft, Single Shaft, Rotating Drum Type |
| 3 | | Station and Mobile |
| 4 | | From LB500 to LB4000 |
| 5 | | Full-auto |
| 6 | | Accumulative Weighing Type, Separater Weighing Type |
| 7 | | Fixed and mobile |
| 8 | | With universal joint |
| 9 | | From 3m3 to 16m3 |
| 10 | | Electric type and diesel engine powered |
| 11 | | Manual, Electric, Diesel |
| 12 | | ZL06-ZL50 |
| 13 | | Single Cage and Double Cage |
| 14 | | stationary, mobile,outside-climbing, inside-climbing, horizontal-jib, luffing-jib, hammer-head, flat-top |
Product Tags:
|
|
50T/H Dry Mortar Production Line Dry Mortar Plant 50t/H Mix Plant Images
|
